Fluid Reactor 
Product
Spotlight
The Fluid Reactor
magnetic water treatment system can help with a range of water quality issues.
Units change the properties of any liquid passing through
them, and result in numerous beneficial changes. Pipes and hoses have less
buildup, cattle are more likely to drink treated water, and crops produce a
better yield. Browse its applications in the cattle industry, irrigation applications, and domestically.
How Does it Work?
High performance,
magnetic energy is focused into the pipe carrying the fluid as it passes.
Magnetic energy is transmitted to the water. This forces a physical and
potential change to occur in the water. The calcium in the water and other
like-minerals are prevented from crystallizing, or causing scale deposits.
By magnetically
locking the water, the surface tension drops and the water becomes
softer and performs better.
The salt
(chlorides & sodium) are reduced in intensity changing the salty taste and
behaviour of the water.
The new Fluid
Reactor is more powerful than other units on the market. It
also emits a negative defusing technology down the pipe that provides for far
greater magnetic saturation.
The Fluid
Reactor provides
the most powerfully effective and very real weapon in reducing the effects of
salinity in garden and agricultural use.
The Fluid Reactor is
out-performing every other type of treatment device on the international market
due to its ability to reduce salinity
and soften extremely
hard water. Pocket the savings, without
recourse to expensive salt softeners.
Help the environment. Enjoy maintenance free, soft,
scale free water for life!
Fluid Reactor in the Cattle Industry
The
Fluid Reactor's results in the cattle industry speak for themselves. Browse
below and see how it has helped cattlemen with a range of water quality issues.
Outside
its direct value in improving bore water quality, it is designed to optimize:
Irrigation Systems
Dairy Hot water
Laundries
Ice Making
Hydroponics
All Commercial Boilers
Heat Exchangers
Cooling Towers
Distillers/Chillers
Engine Cooling System
No
chemicals - Excellent for the environment
No
power required - No power connection
No
Costly down-time - Continuous operation
No
salt softeners - No re-current expenditure
Permanently
- Cannot wear out
Maintenance
free - Scale free - Corrosion free
Install
the Fluid Reactor for maximum performance
Performance
Guarantee
Virtual Lifetime Guarantee.
Fluid Reactor for Irrigation 
Softens the hardest of water.
Eases & Controls Salinity
Dissolves salt build-up in soil.
Realistic water savings
Cleans up plumbing & fixtures.
Promotes better plant osmosis (plant water
take-up)
Reduces and can stop iron staining.
Stops leaf burn and salt root damage.
Technician installed or self install by
directions.
Installed for life
Guaranteed to perform
Guaranteed to last virtually forever
No power required
For more details on
the above problems, see our FAQs section below.
Fluid Reactor for Domestic Applications
Softens the hardest
water
De-scales boiler tubes
De-scales boilers
Cleans up plumbing & fixtures
De-scales heating systems using water
Reduce or eliminate chemicals in boilers
Excellent for heat exchangers
Technician installed
Installed for life
Guaranteed to perform
Guaranteed to last virtually forever
No power required
No plumbing required
No maintenance, ever.
No messy wires
How does
it work?
High performance, magnetic
energy, is focused into the pipe carrying the fluid as it passes. Magnetic
energy is transmitted to the water. This forces a physical and potential change
to occur in the water. The calcium in the water and other like- minerals are
prevented from crystallizing, or causing scale deposits. By magnetically
locking the water, the surface tension drops and the water becomes
softer.
The Reactor performance has
become well known to the very many users who have experienced the
benefits of free energy magnetic conditioning.
The Fluid Reactor is more
powerful than the other units on the market. The unique negative defusing
action or the Reactor results in a powerful magnetic effect entering the water
where it converts the polarity of the minerals in the water. Instead of
improving the taste of hard water, it smashes through the hardness barrier to
soften the water.
The new Fluid Reactor is out-performing every other type of
treatment device on the international market due to increased power and the
defuser technology. The Fluid Reactor comes with a lifetime
power warranty.
Fuel Reactor for Vehicles and Generators
Save fuel
and dollars spent on fuel! The same principles that lead to such striking
results with water treatment also achieve great outcomes with fuel and coolant
conditioning.
Gain:
More power
Much lower emissions
Quicker starting, Smoother running
Less fuel used
Cleaner engine
Guaranteed to perform
Guaranteed to last virtually forever
No power required
No maintenance, ever
No messy wires
Simple self installation
How does it work on fuel and air?
High
performance, positive magnetic energy, is focused into the pipe carrying the
fuel as it passes. Negative energy is transmitted to the air by a
separate unit. This forces a physical and potential change to occur in both
which substantially improves attraction, promotes far better combustion through
better atomization of the combined fuel/air mix.
Turbulence
in the combustion chamber is higher, and the mix cooler.
But there is more to it - The change results in re-burning carbon,
tar and varnish deposits. A cleaner engine means less maintenance, wear
and tear.
The
new, Fluid Reactor is
out-performing every other type of magnetic treatment device on the
international market. Pocket the savings. The Fluid Reactor comes
with a lifetime power warranty. It can virtually never wear out.
Help the environment. Enjoy maintenance free extra
power and lower your exhaust emissions.
Frequently Asked Questions and
Documentation
We've had many a
question asked of magnetics over the years; so we decided to write them and our
answers down in an effort to give you all the information you need to know
without the need to scour the rest of the Internet looking for it. Likewise, as
we come across research that is relevant to any relevant topics, they will be
made available here.
If there is
anything you would like to know that isn't listed here, please don't hesitate
to contact your local representative.
FLUID
REACTOR QUESTIONS
What
is Magnetic Conditioning?
Using magnetic energy to condition any fluid or gas for
improved performance of that gas, or fluid.
How
does this occur?
A
very powerful south-pole magnet is placed over a pipe carrying fluid and the
energy from that magnet is induced into the passing fluid and held there as it
moves on.
Using
a special process called Negative Diffusing Action only contained in the
Australian Fluid Reactor, the very focused and powerful positive energy, only
from the magnetic south-pole, is inducted into the passing fluid or gas.
This
new potential substantially alters the behaviour of the molecular nature of the
passing fluid. In the case of water, a number of things occur.
Molecular
change:
This
electrical activity prevents calcium from forming as a hardness crystal along
with magnesium by making the oxygen molecules un-available to the either ion in
the water.
This
absolutely prevents scale from naturally occurring from calcium carbonate, as
it cannot reach the oxygen molecules necessary to form this compound.
What
effect does this have?
It
will remove existing scale build-up from all plumbing equipment by
re-dissolving the scale back to solution. It effectively releases the
oxygen molecules from the calcium carbonate.
Calcium
and magnesium both become ions again and thus both are more available for use,
not to cause damage.
Softening
The
magnetic action also magnetically locks the molecular behaviour of the fluid,
lowering the surface tension, creating a further softening effect. Like blocks
in a box, the miniature poles of a water molecule, are changed by strengthening
the natural molecules positive charge. This causes a greater attraction
to the opposites (north). The poles lock and remain locked and the
surface tension drops as there is no further molecular movement.
Magnetic
condition offers a number of changes
The
magnetic lock occurs and the DC voltage induction both impact on the fluid or
gas being treated.
Test and Taste
change
These
changes will cause a pH change in some water supplies, depending on the
molecular make up and also taste change must follow. Other changes also occur.
How
is the Fluid Reactor installed?
This
is the next critical step. Although the Fluid Reactor is extremely
powerful and very well developed, both installation and knowledge of the water
supply being treated are both important.
Trained
technicians
It
is essential that trained technicians install Reactors or at the very least, closely
guide the consumer through the process.
Why?
The testing of the water supply.
The setting up for installation.
The test procedure that must be applied.
This
not always necessary is in some circulation systems such as spas and some
swimming pools.
How
long due the units last?
Virtually forever. (Ten year manufacturers warranty is given)
Maintenance?
No
maintenance, ever
Completed
Work and Newspaper Articles
Much has been
written about the Fluid Reactor over the years, and weve included a selection
of the writings here for you to view.
The documents to
the left include each clients observations of the difference made by using our
systems in various applications. This includes water for both livestock and
crop irrigation, as well as for other purposes.
Below those, you
will find copies of various newspaper articles that further draw attention to
the benefits of using Fluid Reactor to solve any similar problems you may have.
Do note that although the Fluid Reactors national distributor, Ian Gundrill is
noted in some of the articles, all enquiries about the product should be made
via your local distributor.
Completed fluid
reactor work
|
Property:
|
|
|
Location: |
Bauhinia Moura |
|
|
|
|
Contact: |
Brian & Joy Moloney |
|
|
|
|
Technician: |
Tom Durey |
|
Units Installed: |
2 x FR5100 3 x
FR2050 |
|
Water Analysis: |
|
|
TDS |
400 |
|
Conductivity |
1000 |
|
pH |
8.5 |
|
Calcium
Hardness |
60 |
|
Chlorides |
0 |
|
Alkalinity |
380 |
|
Iron |
0.15 |
|
Nitrates |
0 |
|
|
|
|
|
|
|
|
|
Summary:
Moderately
hard water with some iron staining in the winter month of July the water intake
was stable at 16 LPH per day.
Immediately
after installation of the Fluid Reactor system the intake rose to 24 LPH. This
rose further in the later and hotter part of the year to stabilise at 40LPH. Calcium
problem diminished and the clarity presentation of the water was greatly
improved.
"This
has put huge dollars on our bottom line"
Bio
slime from iron bacteria has been reduced but not completely eradicated. When
the tank is full, the Fluid Reactor controls the bacteria, however, when the
tank is low and the slime dries out and falls back into the tank it re-hydrates
and reintroduces the problem down stream.
A
SeaQuest feeder will be installed shortly to sequester the iron and remove the
oxidised iron resulting in the iron bacteria being deprived of its host
environment (oxidised iron) the bacteria under these circumstances die out.
|
Property: |
Trevor
Post |
|
Location: |
Mackay Qld |
|
|
|
|
Contact: |
Trevor Post |
|
|
|
|
Units
Installed: |
1 x FR2050 |
|
Water Analysis: |
|
|
TDS |
120 |
|
Conductivity |
300 |
|
Calcium H/ness
|
50 |
|
Chlorides |
0 |
|
Alkalinity |
70 |
|
Iron |
0 |
Comments:
No
apparent water problems were present at time of installation, however, Trevor
was keen to achieve the very best crop results possible and agreed to a trial
using a FR2050 Reactor unit on eight row of sweet potato's and one row of
pawpaw trees that where not doing so well in the present situation.
This
was in a very hot period of the year when irrigating was a priority, the
control for this trial was the balance of the crop that remained untreated.
Results:
The results that followed where absolutely astounding. The foliage on the
sweet potatoes struck early and grew rapidly with consistent coverage it was
noticeable that the weeds couldn't get through in the early stages of growth.
More
interesting was the 60 - 70% extra root mass that took place with the magnetic
treated rows. The same observations could not be made in the crop without the
fluid reactors.
Trevor
didn't wait for the completion of our trial; he purchased the Fluid Reactor
without hesitation and proceeded to irrigate the control crop as well. He was
noted to say he couldn't afford not to go ahead with this system. Trevor
received top dollar at the
A
letter from Trevor:
To Whom It May
Concern
I was first quite skeptical
about what a magnet could do to help plant growth so I tried two plots of sweet
potatoes and two lots of paw paw trees on the magnetic water and then I did the
same without the magnetic water.
Much to my surprise
within 4-6 weeks the difference of both the paw paws and the sweet potatoes on
the magnetic water was quite noticeable and the time progressed I had no doubt
that the claims made were accurate and quite obvious to see the difference in
the plant health to the lay man. One thing that really took my interest
was the fact the root system was so much better on the magnetic water which
then, as you would expect following through to healthier plants more pest
resistant and earlier harvest better produce as Ian had stated.
I now use the Fluid
Reactor on everything and feel quite confident that it was money well spent.
Trevor Post
Mackay Qld
Jim Viner - Portas Rd Glastonbury
The DPI monitored these results
and were posted in DPI Journals in 2001
EC
1020 TDS 761 T/Hard 303 T/Alk 338 pH 7.8 SAR 2.45
Cattle
consumption shifted for 35 Litres per Head (LPH) to 50 LPH in the first 2 days
of installation, cattle have now taken on a calm behaviour compared to pre
Fluid Reactor application.
Other
peripheral results included complete calcium removal from floats and pipe
system in three weeks. Water perfectly clear and settled.
Consumption
levels remained high even when feeding "Nitimole" with Dosertron
equipment.
Jeff & Cheryl Chatman - Woolshed Station, Eidsvold
We were invited to treat
peripheral water problems like algae, bio-film slim, calcium, etc.
Immediately after the Fluid Reactor was installed the Chapmans commented as
follows:
"We thought we had good
quality water, we put the Fluid Reactor system in place because we were having
trouble with algae and calcium build-up". But two days after the system
was operating our troughs turned up completely clean.
More importantly
the water consumption rose from 17LPH per day to 33 LPH per day.
Trevor
Henderson - Kilkivan
|
Water Test Trevor Henderson |
|
|
Electrical
Conductivity |
2200 |
|
Total Dissolved
Solids |
1160 |
|
PH |
7.5 |
|
Total Hardness |
700 |
|
Calcium
Hardness |
260 |
|
Alkalinity |
500 |
|
Total Chlorides |
400 |
|
|
|
Comments
There was an instant softening
of the water treated with the Fluid Reactor
magnetic treatment system, lather increased and problems such as
blocking of washing machine filters ceased. There was a complete prevention of
calcium buildup on the shower rose and bacterial smell was eliminated in water.
A reverse osmosis system was also fitted under the sink to treat drinking water
to a very high standard.
You would not believe how good this water tastes
|
Property: |
Yabba
Station |
|
|
|
|
|
|
|
Contact: |
Nicholas & Joanne Markwell |
|
|
|
|
Installation
Date: |
Nov-99 |
|
Technician: |
Tom Durey |
|
Units
Installed: |
2 x 5100 20 x
2050 1 x Neg 1 x 1020 |
|
Water Analysis |
|
|
TDS |
3900 |
|
Conductivity |
8700 |
|
pH |
8.2 |
Water Problem
The Markwell's water supply could be best
described as ordinary with a few more problems thrown in. It tested very hard,
and brackish, this added to the turkey's nest and drinking troughs being
inundated with algae. Pumping over these distances created more problems with
pipe blockages from calcium and magnesium hardness. Combine this water with
urea and it's not surprising that it didn't mix well creating a cocktail the
cattle preferred not to drink.
This property was first tested by us in
Nov 99 and one half of the property was fitted with Reactor units to improve
the water drinking quality to weaner cattle. We later visited again in April
2000 to fit up the remainder of the property with Reactor units. All units were
required to be strategically located to maximize the change in the water quality
this included the bore, turkey's nest, and troughs. The alternatives to using
the Reactor system was to drill to the artesian basin some 700 meters or more
then equip the bore with pumps etc. The cost of this would have exceeded
$110,000 We have saved the Markwell's over $100,000
with the implementation of our system.
Results &
Observations
Bore water quality corrected immediately.
Algae & scale in turkey's nest and pipes removed in 10 days
. Troughs had to be cleaned of green slime from dead algae each day over
this period. The cattle water intake is monitored by computer on this property
to regulate urea dosing. The cattle fluid intake prier to our installation in
Nov was monitored at a very desperate 3Lt per head per day for 350Kg weaners.
Just four days after installation was complete we contacted Nicholas &
Joanne to find they were astonished to see the intake per head of cattle
increased to 35Lt per head per day. Later that month this had
increased in a hot spell to peak at 60 Lt per day Urea is now able to be used
when needed without the cattle rejecting it due to taste. We also fitted
up the Markwell's truck with a Reactor energiser kit to improve on economy
de-carbon the engine and injectors , increase power, and reduce exhaust
emission by up to 80%
We wish to thank Nicholas and Joanne for
their enthusiasm and their interest. There has been even more interest since
the March edition of the Qld Country Life where a
story on the Markwell's cell grazing methods included the advantages
they gained from the Reactor System
Four Seasons Farm - Canungra QLD
Trial on Bore
Water
PH 8.4 E.C. 1.09
Chloride 145
mg/L
Sodium 84 mg/L
Magnesium 67
mg/L
Hydroponics
using a slightly modified Huet mix to suit the bore water. We trialed
lettuce using this formula but plants were tough
and stunted. Using the Fluid
Reactor, plants
were soft, grew strongly and matured quicker. We usually have a
build up of salts in the micro tubes and a lot
of algae in the gullies, both of these
problems did not exist using the magnetic
treatment.
Plants used were
approx 5 weeks old, half in seedling mix, half in rockwool.
Planted
Plants
in rockwool. After
one week the rockwool that was in contact with
the water changed colour and went pale.
Difference in roots:
Roots are very
white and growth is more vigorous.
Comparison
done at Maturity
Weight Comparison:
|
Lettuce Variety |
Using Fluid Reactor |
Without Using Fluid
Reactor |
|
|
336g |
188g |
|
Green Oak |
310g |
238g |
|
Green Coral |
190g |
156g |
|
Red Oak |
233g |
153g |
Plants were
ready for harvest 5-7 days earlier. Plants were more robust in growth and stems
were stronger and thicker, root system stronger and larger
and very soft and white. No sign of pythium.
Difference in
the growth of the Cos Lettuce was exceptional - plants grown using Fluid
Reactor water produced a much larger plant and stronger root system.
Because plants
matured one week earlier, an extra crop per year can be planted. Plants grew so
fast they had slight yellowing of the margins so an overhead spraying of
calcium nitrate weekly for last three weeks was necessary. We did a second
trial and results were the same.
Contact
your local representative for further information on the Magnetic Fluid
Reactor.